Pyrophyllite ultrafine mill equipment

2017-11-24

Pyrophyllite ultrafine mill equipment

Pyrophyllite ultrafine mill equipment

Pyrophylite crystals are long platelike and often cristobalite, mostly in leaf-like, fibrous, radial and lamellar blocks. White, gray, light blue, light yellow, light green and green-brown, streak white. Transparent to translucent, fresh face was pearly luster. Pyrophyllite touch a greasy feel. Heating flakes, and insoluble in most acids.

Pyrophyllite ultrafine mill machine after processing a wide range of uses:

Mainly used as refractory materials, ceramic materials and carving raw materials; followed also for rubber products, cosmetics, pesticides and other fillers and carriers. The new use of pyrophyllite is used as a coating material, but also a good raw material for the production of siding, can also be used to make white cement. Phyllite powder grinding scope of application:

Pyrophyllite processing equipment in the HGM series of tricyclic ring medium-speed ultrafine mill is the latest research and development of the Shanghai SBM mill new milling equipment, HGM mill not only processing pyrophyllite, but also on the low Non-flammable and brittle materials such as calcite, chalk, limestone, dolomite, carbon black, pyrophyllite, bentonite, talc, petroleum coke, magnesite, More than 100 kinds of materials such as stone, pyrophyllite, vermiculite, sepiolite, attapulgite, rectorite, diatomaceous earth, barite, gypsum, alunite, graphite, fluorite, .

ultrafine mill

HGM series pyrophyllite ultrafine mill consists of five models, namely HGM80, HGM90, HGM100, HGM100A, HGM125. Pyrophyllite crushing equipment, milling equipment mainly in the following categories:

Jaw Crusher: Processing fineness in the 10-105mm, the maximum capacity of 90 tons / hour;

Hammer crusher: Processing fineness of 25mm below, the maximum capacity of 45 tons / hour;

Box crusher: The maximum feed size 600-800mm, finished fineness 50mm below, the maximum capacity of 160 tons / hour;

European version of coarse ultrafine mill: processing fineness in the following 3mm, the maximum handling capacity of 100 tons / hour;

YGM high pressure roller Raymond mill: processing fineness between 15-200 mesh (fineness can be adjusted);

HGM tricyclic medium speed ultrafine mill: processing fineness between 200-3000 mesh (fineness can be adjusted);

Pyrophyllite grinding work principle:

Work, milling machine host motor through the reducer drive spindle and turntable rotation, the edge of the turntable roller drive roller dozens of rollers in the grinding ring raceway rolling. Pyrophyll ore by hammer crusher broken into small particles by the elevator into the storage silo, and then through the vibrating feeder and the inclined feeding pipe, the pyrophyllite particles evenly to the upper part of the turntable bulk tray on. The pyrophyllite particles are scattered toward the periphery under the action of centrifugal force and fall into the raceway of the grinding ring and are impacted by the ring roll, rolled, ground and processed into pyrophyllite powder through the processing of the three layers of circular path. The external air is sucked into the machine, and the pulverized pyrophyllite powder is brought into the separator. The impeller rotating in the separator makes the coarse pyrophyllite fall down and reground, and the fine powder meeting the requirements enters the cyclone collector with the air flow and is discharged by the lower discharge valve, which is the final pyrophyllite powder, A small amount of fine dust gas flow is purified by pulse dust collector and exhaust through the fan and muffler.

Pyrophyllite grinding performance characteristics:

  • 1 High efficiency
  • In the pyrophyllite finished fineness and motor power under the same circumstances, the pyrophyllite mill than the jet mill, ball mill and more production more than doubled;

  • 2 wearing parts long service life
  • Grinding roller, grinding ring made of special materials forging, so that the degree of durability greatly improved. In the case of the same fineness of the material and the finished product, the wearing parts of the pyrophyllite ultrafine mill have 2-3 times longer service life than the wearing parts of the impact crusher and the turbo mill, and the general service life is more than one year. Milling equipment in the processing of calcium carbonate, pyrophyllite, calcite, the life of up to 2-5 years;

  • 3 high safety and reliability/li>

    Due to the grinding chamber without rolling bearings and screws, so there is no bearing and its seals vulnerable to problems, or due to screw loose and destroy the machine;

  • 4. Product fineness
  • After this milling equipment processed pyrophyllite fineness of finished products can reach D97 ≤ 5μm;

  • 5. Small environmental pollution
  • The use of environmentally friendly pulse dust remover and muffler in milling equipment greatly reduces dust and noise pollution to the surrounding environment.

Pyrophyllite grinding equipment components:

Full set of configuration including hammer crusher, bucket elevator, storage silo, vibrating feeder, petroleum coke mill host, frequency classifier, double cyclone powder collector, pulse dust removal system, high pressure fan, air compressor Electrical control system.

Tag: ultrafine mill, raymond mill, T130X Reinforced Ultrafine Mill